view article
Figure 3
Dispersive Bragg bender. The 30 cm-long crystal, (1), has one-third of its vertical dimension immersed in the eutectic bath, (2). Two micrometric jacks, (3), apply the bending force through the lever arms, (4). A piezoelectric actuator, (5), with a manual initial adjustment through a differential screw, (6), allows the correction of the twist via a weak-link lever, (7). The two right rollers, (8), of the four-point bending system are indicated, as well as the axis of Bragg rotation, (9).

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 5| Part 6| November 1998| Pages 1396-1397
https://doi.org/10.1107/S0909049598011315
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS