view article

Figure 4
Photograph of the triply layered bent-crystal analyzer. The inset shows its schematic representation. The radius of curvature is adjusted by pushing apex A of each crystal, and parallelism between the crystals is adjusted by turning each holder about the pivot P. The frame on which the holders are mounted can be tilted along two directions ([\varphi_1] and [\varphi_2]) and rotated to adjust the Bragg angle ([\theta_{\rm B}]).

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Follow J. Synchrotron Rad.
Sign up for e-alerts
Follow J. Synchrotron Rad. on Twitter
Follow us on facebook
Sign up for RSS feeds