view article
Figure 8
Reconstructed fuel density distribution rings at 820 µs with cross-sectioned slices at 5 mm, 8 mm, 12 mm and 18 mm from the nozzle. The maximum fuel density in any of these cross sections is 105 µg mm−3 which is considerably less than the liquid density of the test fuel blend of 840 µg mm−3. The asymmetry of the spray is apparent in the cross-sectional rings and is evaluated quantitatively and summarized in Table 2[link]. The vertical mark (dashed line in the 12 mm cross section) illustrates the halves where the fuel mass values are evaluated.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 12| Part 2| February 2005| Pages 197-207
doi:10.1107/S0909049504032297
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS