view article
Figure 6
Geometry of beam alignment for stress measurements of specimens. (a) The specimen surface is irradiated with half of the incident beam. (b) The θ–2θ condition for {113} planes in SUS316L steel after the specimens are raised by 0.2 mm. (c) The diffracted beam is collimated with double slits of width 0.2 mm. Dark areas in (b) and (c) show gauge volumes contributing to diffraction intensity. SC = scintillation counter.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 13| Part 1| December 2006| Pages 14-18
doi:10.1107/S0909049505038288
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS