view article
Figure 5
(a) Differential stress versus time as measured with a white X-ray beam within the alumina pistons compressing a forsterite sample in the D-DIA at the indicated P and T conditions. Exploitable alumina hkl peaks are indicated. Discrepancy in stress measurements at a given time results from both accuracy on the measurement and the properties of the stressed alumina polycrystal. Average differential stress t values are indicated for each steady-state regime of deformation. (b) Corresponding strain versus time plots as measured by X-ray radiography (§3.4[link]) of the forsterite sample. Steady-state deformation translates here by constant strain rates (indicated slopes).

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 16| Part 6| September 2009| Pages 748-756
doi:10.1107/S0909049509034426
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS