view article
Figure 6
Relation between applied load and generated hydrostatic pressure. Solid circles and crosses represent data obtained in the run of platinum (anvil taper angle, 20°) and ringwoodite (anvil taper angle, 25°), respectively. A pressure of 32 GPa was generated for a load of 95 tons. Note that pressure increases linearly with applied load up to about 20 GPa (40 tons) and the P versus L relation becomes non-linear above this pressure.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 16| Part 6| September 2009| Pages 742-747
doi:10.1107/S0909049509033342
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS