view article
Figure 1
(a) Representation of the pattern used to create a cylindrical sample. Milling will take place in the numbered order with the final cylinder being shown in the shaded region. (b) Positioning of the system during cut-off and lift-out of the sample.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 19| Part 5| July 2012| Pages 789-796
doi:10.1107/S0909049512027252
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS