view article
Figure 10
(a) Remaining slope error of the I20 mirror M1 after best correction with bending actuators alone. See text for details. (b) Figure error calculated by integrating the residual of the slope error measured in situ on the I20 mirror M1 for a sag compensation setting of −2.5. This did not exactly match the manufacturer's data but is of the same order of magnitude.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 19| Part 6| November 2012| Pages 960-968
https://doi.org/10.1107/S090904951203662X
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS