view article
Figure 8
Standard vertically focusing mirror with support points S1 and S2 and prop load points P1 and P2. L is the length of the mirror, d is the distance between the supports and t is the distance between the prop load points. FS1 and FS2 are the forces applied to the mirror at its supports, and FP1 and FP2 the forces applied by the props to compensate for the sag under gravity. The gravitational force (not shown) is applied evenly across the whole mirror.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 19| Part 6| November 2012| Pages 960-968
https://doi.org/10.1107/S090904951203662X
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS