view article
Figure 1
Microfluidic capillary flow set-up. (a) The portable set-up consists of a syringe pump (bottom left), water-cooled sample mount on a motorized stage (center) and photodiode (behind the sample mount). The sample mount is assembled close to the ultrahigh-vacuum beampipe which is capped with a beryllium window. (b) Front view of the temperature-controlled sample mount. The horizontal slits hold the capillary horizontal to the beam. The photodiode allows detection of attenuated beam through the aluminium sample mount, and the alignment of the capillary tube is carried out by horizontal and vertical slits.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 21| Part 4| May 2014| Pages 690-699
doi:10.1107/S1600577514007000
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS