view article
Figure 4
Schematic drawing of the high-pressure gas supply system. Gas detectors for CO and H2 are installed in both cabinets and the experimental hutch. The installation height for the CO detector in the hatch is roughly 1.5 m. The H2 detector in the hutch is installed on the ceiling. If a leakage is detected, the control panel will shut down the solenoid valves automatically and increase the speed of the fan to full speed which, under normal operation, runs at half of its maximum speed.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 22| Part 3| May 2015| Pages 839-843
https://doi.org/10.1107/S1600577515002854
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS