view article
Figure 1
Schematic of the mechanical bender: the mirror (M) is supported by the clamps (C) attached to levers (L). The cam mechanism (CM, here not detailed for property-rights reasons) pushes the follower (F), compressing the spring (S) against the force bar (FB). Because of the compression of the spring, reaction forces are applied to the levers (FL), creating a torque (T) on the mirror ends.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 23| Part 4| July 2016| Pages 855-860
doi:10.1107/S1600577516005828
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS