view article
Figure 13
(a) Two-dimensional dose distributions evaluated with an EBT3 radiochromic film in a 14 cm-diameter PMMA phantom and (b) corresponding surface plots of percentage of maximum dose: two off-center foci (left side) and line distribution (right side). The intended dose distribution was obtained with multiple rotations. (c) For ease of visualization of the sample geometry, photograph taken during the placement of one-half of the cylindrical phantom on the rotation stage, where the piece of EBT3 film is visible at the mid-plane in the PMMA phantom. Above the film the longitudinal half cavity realized for hosting the ion chamber is visible, along the vertical axis of the cylindrical phantom.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 25| Part 3| May 2018| Pages 857-868
https://doi.org/10.1107/S1600577518003788
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS