view article
Figure 1
The optical subsystem of an X-ray CCD detector based on the direct coupling of the fiber-optic taper to the CCD chip. The arrows indicate the impinging parallel light. The grid mask of known size attached to the surface of the fiber-optic taper is used for the precise correction of local distortions in the presented algorithm. For better visibility, the number of grid points has been reduced. The typical coverage is 150 × 150 grid points for a 90 mm-diameter taper with hole sizes of about 150 µm.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 32| Part 1| February 1999| Pages 11-14
doi:10.1107/S0021889898005172
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS