metal-organic compounds\(\def\hfill{\hskip 5em}\def\hfil{\hskip 3em}\def\eqno#1{\hfil {#1}}\)

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890

Crystal structure of bis­­(4-acetyl­anilinium) tetra­chlorido­cobaltate(II)

aPG & Research Department of Physics, Government Arts College, Ariyalur 621 713, India, bDepartment of Chemistry, Thiagarajar College, Madurai 625 009, India, and cBiomolecular Crystallography Laboratory, Department of Bioinformatics, School of Chemical and Biotechnology, SASTRA University, Thanjavur 613 401, India
*Correspondence e-mail: selsphy@yahoo.com, thamu@scbt.sastra.edu

Edited by M. Weil, Vienna University of Technology, Austria (Received 9 November 2015; accepted 11 November 2015; online 18 November 2015)

The structure of the title salt, (C8H10NO)2[CoCl4], is isotypic with the analogous cuprate(II) structure. The asymmetric unit contains one 4-acetyl­anilinium cation and one half of a tetra­chlorido­cobaltate(II) anion for which the CoII atom and two Cl ligands lie on a mirror plane. The Co—Cl distances in the distorted tetra­hedral anion range from 2.2519 (6) to 2.2954 (9) Å and the Cl—Co—Cl angles range from 106.53 (2) to 110.81 (4)°. In the crystal, cations are self-assembled by inter­molecular N—H⋯O hydrogen-bonding inter­actions, leading to a C(8) chain motif with the chains running parallel to the b axis. ππ stacking inter­actions between benzene rings, with a centroid-to-centroid distance of 3.709 Å, are also observed along this direction. The CoCl42− anions are sandwiched between the cationic chains and inter­act with each other through inter­molecular N—H⋯Cl hydrogen-bonding inter­actions, forming a three-dimensional network structure.

1. Related literature

For the structure of the isotypic tetra­chlorido­cuprate(II) compound, see: Elangovan et al. (2007[Elangovan, A., Thamaraichelvan, A., Ramu, A., Athimoolam, S. & Natarajan, S. (2007). Acta Cryst. E63, m224-m226.]).

[Scheme 1]

2. Experimental

2.1. Crystal data

  • (C8H10NO)2[CoCl4]

  • Mr = 473.07

  • Orthorhombic, C m c e

  • a = 19.4605 (6) Å

  • b = 15.5108 (6) Å

  • c = 13.7374 (5) Å

  • V = 4146.6 (3) Å3

  • Z = 8

  • Mo Kα radiation

  • μ = 1.36 mm−1

  • T = 293 K

  • 0.3 × 0.2 × 0.2 mm

2.2. Data collection

  • Bruker SMART APEX CCD diffractometer

  • Absorption correction: multi-scan (SADABS; Bruker, 2004[Bruker (2004). APEX2, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.]) Tmin = 0.687, Tmax = 0.773

  • 24499 measured reflections

  • 3329 independent reflections

  • 2439 reflections with I > 2σ(I)

  • Rint = 0.035

2.3. Refinement

  • R[F2 > 2σ(F2)] = 0.039

  • wR(F2) = 0.123

  • S = 1.05

  • 3329 reflections

  • 131 parameters

  • 3 restraints

  • H atoms treated by a mixture of independent and constrained refinement

  • Δρmax = 1.35 e Å−3

  • Δρmin = −0.66 e Å−3

Table 1
Hydrogen-bond geometry (Å, °)

D—H⋯A D—H H⋯A DA D—H⋯A
N41—H41A⋯O11i 0.91 (2) 1.88 (2) 2.781 (3) 174 (3)
N41—H41B⋯Cl2ii 0.92 (2) 2.31 (2) 3.211 (2) 168 (3)
N41—H41C⋯Cl3iii 0.88 (2) 2.48 (2) 3.309 (3) 157 (3)
Symmetry codes: (i) [-x+{\script{1\over 2}}, y-{\script{1\over 2}}, z]; (ii) [x+{\script{1\over 2}}, y, -z+{\script{3\over 2}}]; (iii) [-x+{\script{1\over 2}}, -y+{\script{1\over 2}}, -z+2].

Data collection: APEX2 (Bruker, 2004[Bruker (2004). APEX2, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.]); cell refinement: SAINT (Bruker, 2004[Bruker (2004). APEX2, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.]); data reduction: SAINT; method used to solve structure: coordinates taken from an isotypic structure; program(s) used to refine structure: SHELXL2014 (Sheldrick, 2015[Sheldrick, G. M. (2015). Acta Cryst. C71, 3-8.]); molecular graphics: PLATON (Spek, 2009[Spek, A. L. (2009). Acta Cryst. D65, 148-155.]); software used to prepare material for publication: publCIF (Westrip, 2010[Westrip, S. P. (2010). J. Appl. Cryst. 43, 920-925.]).

Supporting information


Synthesis and crystallization top

A solution of 4-amino­aceto­phenone (20 mmol) in 2 ml of HCl and deionized water (10 ml) was added to a 10 ml solution of CoCl2·6H2O (10 mmol). The resulting solution was concentrated and kept unperturbed at ambient temperature for crystallization. Dark green block-shaped crystals were obtained after 7 days.

Refinement top

Since the title complex is isotypic with its tetra­chloridocuprate counterpart, it was refined with the coordinates of the latter (Elangovan et al., 2007) as starting parameters. The amino H atoms were located from a difference Fourier map and refined with a distance restraint of N—H = 0.89 (2) Å. The methyl H atoms were constrained to an ideal geometry (C—H = 0.96 Å) with Uiso(H) = 1.5Ueq(C), but were allowed to rotate freely about the C–C bond. The remaining H atoms were positioned in geometrically calculated positions and refined using a riding model with C—H = 0.93 Å and Uiso(H) = 1.2Ueq(C). At this stage, the maximum residual electron density of 1.35 e Å-3 indicated the presence of a possible atom at Wyckofff position 4a at a distance of 2.81Å near atom H5. This peak was assumed to be the O atom of a water molecule and was refined with isotropic displacement parameters. However, the resultant model had slightly higher reliability factors and a very high isotropic atomic displacement parameter for this O atom. As a consequence, this water O atom was not included in the final model.

Related literature top

For the structure of the isotypic tetrachloridocuprate(II) compound, see: Elangovan et al. (2007).

Structure description top

For the structure of the isotypic tetrachloridocuprate(II) compound, see: Elangovan et al. (2007).

Synthesis and crystallization top

A solution of 4-amino­aceto­phenone (20 mmol) in 2 ml of HCl and deionized water (10 ml) was added to a 10 ml solution of CoCl2·6H2O (10 mmol). The resulting solution was concentrated and kept unperturbed at ambient temperature for crystallization. Dark green block-shaped crystals were obtained after 7 days.

Refinement details top

Since the title complex is isotypic with its tetra­chloridocuprate counterpart, it was refined with the coordinates of the latter (Elangovan et al., 2007) as starting parameters. The amino H atoms were located from a difference Fourier map and refined with a distance restraint of N—H = 0.89 (2) Å. The methyl H atoms were constrained to an ideal geometry (C—H = 0.96 Å) with Uiso(H) = 1.5Ueq(C), but were allowed to rotate freely about the C–C bond. The remaining H atoms were positioned in geometrically calculated positions and refined using a riding model with C—H = 0.93 Å and Uiso(H) = 1.2Ueq(C). At this stage, the maximum residual electron density of 1.35 e Å-3 indicated the presence of a possible atom at Wyckofff position 4a at a distance of 2.81Å near atom H5. This peak was assumed to be the O atom of a water molecule and was refined with isotropic displacement parameters. However, the resultant model had slightly higher reliability factors and a very high isotropic atomic displacement parameter for this O atom. As a consequence, this water O atom was not included in the final model.

Computing details top

Data collection: APEX2 (Bruker, 2004); cell refinement: SAINT (Bruker, 2004); data reduction: SAINT (Bruker, 2004); program(s) used to solve structure: coordinates taken from an isotypic structure; program(s) used to refine structure: SHELXL2014 (Sheldrick, 2015); molecular graphics: PLATON (Spek, 2009); software used to prepare material for publication: publCIF (Westrip, 2010).

Figures top
[Figure 1] Fig. 1. The molecular components in the structure of the title salt. Displacement ellipsoids are drawn at the 50% probability level. [Symmetry code: (i) -x, y, z.]
[Figure 2] Fig. 2. The crystal packing of the title salt viewed along the c axis. Hydrogen bonds are shown as dashed lines; H atoms bound to C were omitted for clarity.
Bis(4-acetylanilinium) tetrachloridocobaltate(II) top
Crystal data top
(C8H10NO)2[CoCl4]Dx = 1.516 Mg m3
Mr = 473.07Mo Kα radiation, λ = 0.71073 Å
Orthorhombic, CmceCell parameters from 14227 reflections
a = 19.4605 (6) Åθ = 2.0–30.0°
b = 15.5108 (6) ŵ = 1.36 mm1
c = 13.7374 (5) ÅT = 293 K
V = 4146.6 (3) Å3Block, green
Z = 80.3 × 0.2 × 0.2 mm
F(000) = 1928
Data collection top
Bruker SMART APEX CCD
diffractometer
2439 reflections with I > 2σ(I)
Radiation source: fine-focus sealed tubeRint = 0.035
ω and φ scanθmax = 30.9°, θmin = 2.2°
Absorption correction: multi-scan
(SADABS; Bruker, 2004)
h = 2728
Tmin = 0.687, Tmax = 0.773k = 1822
24499 measured reflectionsl = 1918
3329 independent reflections
Refinement top
Refinement on F2Primary atom site location: isomorphous structure methods
Least-squares matrix: fullHydrogen site location: mixed
R[F2 > 2σ(F2)] = 0.039H atoms treated by a mixture of independent and constrained refinement
wR(F2) = 0.123 w = 1/[σ2(Fo2) + (0.0558P)2 + 6.0921P]
where P = (Fo2 + 2Fc2)/3
S = 1.05(Δ/σ)max < 0.001
3329 reflectionsΔρmax = 1.35 e Å3
131 parametersΔρmin = 0.66 e Å3
3 restraints
Crystal data top
(C8H10NO)2[CoCl4]V = 4146.6 (3) Å3
Mr = 473.07Z = 8
Orthorhombic, CmceMo Kα radiation
a = 19.4605 (6) ŵ = 1.36 mm1
b = 15.5108 (6) ÅT = 293 K
c = 13.7374 (5) Å0.3 × 0.2 × 0.2 mm
Data collection top
Bruker SMART APEX CCD
diffractometer
3329 independent reflections
Absorption correction: multi-scan
(SADABS; Bruker, 2004)
2439 reflections with I > 2σ(I)
Tmin = 0.687, Tmax = 0.773Rint = 0.035
24499 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0393 restraints
wR(F2) = 0.123H atoms treated by a mixture of independent and constrained refinement
S = 1.05Δρmax = 1.35 e Å3
3329 reflectionsΔρmin = 0.66 e Å3
131 parameters
Special details top

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
O110.19113 (10)0.60656 (11)0.87507 (15)0.0548 (5)
N410.37078 (11)0.26577 (13)0.90637 (18)0.0421 (5)
H41A0.3519 (18)0.2142 (15)0.891 (3)0.082 (12)*
H41B0.4081 (14)0.276 (2)0.867 (2)0.068 (10)*
H41C0.3860 (16)0.268 (2)0.9661 (14)0.065 (10)*
C10.22194 (11)0.46100 (12)0.87145 (14)0.0299 (4)
C20.20229 (11)0.37474 (14)0.86968 (16)0.0353 (4)
H20.15630.36030.86130.042*
C30.25125 (12)0.30994 (13)0.88036 (16)0.0366 (5)
H30.23840.25220.87930.044*
C40.31896 (11)0.33283 (13)0.89257 (15)0.0322 (4)
C50.33997 (11)0.41822 (14)0.89347 (17)0.0371 (5)
H50.38610.43240.90110.045*
C60.29092 (11)0.48178 (13)0.88278 (16)0.0358 (4)
H60.30420.53940.88320.043*
C110.17101 (12)0.53274 (14)0.86411 (15)0.0352 (4)
C120.09695 (12)0.51393 (16)0.8452 (2)0.0483 (6)
H12A0.07270.56700.83430.072*
H12B0.07760.48480.90040.072*
H12C0.09290.47790.78860.072*
Co10.00000.25104 (3)0.86031 (3)0.03357 (13)
Cl10.00000.33842 (5)0.99225 (6)0.04207 (19)
Cl20.00000.33034 (6)0.71924 (6)0.0462 (2)
Cl30.09841 (3)0.17486 (5)0.86639 (6)0.0601 (2)
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
O110.0497 (10)0.0283 (8)0.0863 (14)0.0022 (7)0.0056 (9)0.0036 (8)
N410.0326 (10)0.0337 (10)0.0599 (14)0.0014 (8)0.0043 (9)0.0067 (9)
C10.0330 (9)0.0256 (8)0.0311 (10)0.0005 (7)0.0005 (8)0.0006 (7)
C20.0280 (9)0.0304 (9)0.0476 (12)0.0044 (8)0.0006 (8)0.0006 (8)
C30.0337 (10)0.0261 (9)0.0499 (12)0.0046 (8)0.0011 (9)0.0022 (8)
C40.0311 (10)0.0297 (9)0.0358 (10)0.0002 (8)0.0012 (8)0.0030 (8)
C50.0306 (10)0.0329 (10)0.0479 (12)0.0054 (8)0.0054 (9)0.0005 (9)
C60.0371 (11)0.0270 (9)0.0432 (12)0.0060 (8)0.0026 (9)0.0009 (8)
C110.0387 (11)0.0310 (9)0.0360 (11)0.0017 (8)0.0020 (9)0.0008 (8)
C120.0355 (12)0.0417 (12)0.0676 (17)0.0053 (10)0.0028 (11)0.0038 (11)
Co10.0253 (2)0.0355 (2)0.0399 (2)0.0000.0000.00463 (16)
Cl10.0469 (4)0.0377 (4)0.0416 (4)0.0000.0000.0080 (3)
Cl20.0456 (4)0.0525 (5)0.0405 (4)0.0000.0000.0007 (3)
Cl30.0399 (3)0.0581 (4)0.0824 (5)0.0193 (3)0.0109 (3)0.0218 (3)
Geometric parameters (Å, º) top
O11—C111.220 (3)C4—C51.386 (3)
N41—C41.461 (3)C5—C61.380 (3)
N41—H41A0.904 (18)C5—H50.9300
N41—H41B0.921 (18)C6—H60.9300
N41—H41C0.872 (17)C11—C121.493 (3)
C1—C61.389 (3)C12—H12A0.9600
C1—C21.392 (3)C12—H12B0.9600
C1—C111.494 (3)C12—H12C0.9600
C2—C31.393 (3)Co1—Cl3i2.2519 (6)
C2—H20.9300Co1—Cl32.2519 (6)
C3—C41.375 (3)Co1—Cl12.2631 (9)
C3—H30.9300Co1—Cl22.2954 (9)
C4—N41—H41A109 (2)C4—C5—H5120.7
C4—N41—H41B110 (2)C5—C6—C1120.96 (19)
H41A—N41—H41B110 (3)C5—C6—H6119.5
C4—N41—H41C109 (2)C1—C6—H6119.5
H41A—N41—H41C112 (3)O11—C11—C12121.0 (2)
H41B—N41—H41C106 (3)O11—C11—C1118.6 (2)
C6—C1—C2119.37 (19)C12—C11—C1120.44 (19)
C6—C1—C11118.42 (18)C11—C12—H12A109.5
C2—C1—C11122.2 (2)C11—C12—H12B109.5
C1—C2—C3120.3 (2)H12A—C12—H12B109.5
C1—C2—H2119.9C11—C12—H12C109.5
C3—C2—H2119.9H12A—C12—H12C109.5
C4—C3—C2118.82 (19)H12B—C12—H12C109.5
C4—C3—H3120.6Cl3i—Co1—Cl3116.52 (4)
C2—C3—H3120.6Cl3i—Co1—Cl1106.53 (2)
C3—C4—C5122.04 (19)Cl3—Co1—Cl1106.53 (2)
C3—C4—N41119.57 (19)Cl3i—Co1—Cl2108.21 (3)
C5—C4—N41118.39 (19)Cl3—Co1—Cl2108.21 (3)
C6—C5—C4118.5 (2)Cl1—Co1—Cl2110.81 (4)
C6—C5—H5120.7
C6—C1—C2—C30.8 (3)C4—C5—C6—C10.1 (3)
C11—C1—C2—C3177.6 (2)C2—C1—C6—C50.8 (3)
C1—C2—C3—C40.0 (3)C11—C1—C6—C5177.7 (2)
C2—C3—C4—C50.7 (3)C6—C1—C11—O115.0 (3)
C2—C3—C4—N41178.4 (2)C2—C1—C11—O11173.4 (2)
C3—C4—C5—C60.7 (3)C6—C1—C11—C12175.8 (2)
N41—C4—C5—C6178.5 (2)C2—C1—C11—C125.8 (3)
Symmetry code: (i) x, y, z.
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N41—H41A···O11ii0.91 (2)1.88 (2)2.781 (3)174 (3)
N41—H41B···Cl2iii0.92 (2)2.31 (2)3.211 (2)168 (3)
N41—H41C···Cl3iv0.88 (2)2.48 (2)3.309 (3)157 (3)
Symmetry codes: (ii) x+1/2, y1/2, z; (iii) x+1/2, y, z+3/2; (iv) x+1/2, y+1/2, z+2.
Hydrogen-bond geometry (Å, º) top
D—H···AD—HH···AD···AD—H···A
N41—H41A···O11i0.905 (18)1.880 (19)2.781 (3)174 (3)
N41—H41B···Cl2ii0.920 (18)2.305 (19)3.211 (2)168 (3)
N41—H41C···Cl3iii0.875 (17)2.48 (2)3.309 (3)157 (3)
Symmetry codes: (i) x+1/2, y1/2, z; (ii) x+1/2, y, z+3/2; (iii) x+1/2, y+1/2, z+2.
 

Acknowledgements

ST is very grateful to the management of SASTRA University for infrastructural and financial support (Professor TRR fund).

References

First citationBruker (2004). APEX2, SAINT and SADABS. Bruker AXS Inc., Madison, Wisconsin, USA.  Google Scholar
First citationElangovan, A., Thamaraichelvan, A., Ramu, A., Athimoolam, S. & Natarajan, S. (2007). Acta Cryst. E63, m224–m226.  Web of Science CSD CrossRef IUCr Journals Google Scholar
First citationSheldrick, G. M. (2015). Acta Cryst. C71, 3–8.  Web of Science CrossRef IUCr Journals Google Scholar
First citationSpek, A. L. (2009). Acta Cryst. D65, 148–155.  Web of Science CrossRef CAS IUCr Journals Google Scholar
First citationWestrip, S. P. (2010). J. Appl. Cryst. 43, 920–925.  Web of Science CrossRef CAS IUCr Journals Google Scholar

This is an open-access article distributed under the terms of the Creative Commons Attribution (CC-BY) Licence, which permits unrestricted use, distribution, and reproduction in any medium, provided the original authors and source are cited.

Journal logoCRYSTALLOGRAPHIC
COMMUNICATIONS
ISSN: 2056-9890
Follow Acta Cryst. E
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds