view article
Figure 3
(a) Comparison between (i) the measured I(Q) values with background subtracted, (ii) the starting I(Q) values prior to the fitting procedure, and (iii) the fitted I(Q) values with and without the smoothing factor λ. The starting and fitted values were calculated using equation (4)[link] and their corresponding IQ0(ri) values shown in Fig. 2; for clarity, the starting I(Q) values and fitted I(Q) values with λ > 0 are multiplied by factors of 10 and 0.1, respectively. (b) Deviation of the fitted I(Q) values (with and without smoothing) from the measured I(Q) data.

Journal logoJOURNAL OF
APPLIED
CRYSTALLOGRAPHY
ISSN: 1600-5767
Volume 58| Part 4| August 2025| Pages 1486-1495
https://doi.org/10.1107/S1600576725004315
Follow J. Appl. Cryst.
Sign up for e-alerts
E-alerts
Follow J. Appl. Cryst. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS