view article
Figure 1
Schematic of the TapeDrive setup as used in this study. The sample capillary can be used with and without mixing, the installation remains the same. In this study we did not use the mix-and-diffuse method. The microfluidic controller is connected to the approximately 6 bar pressurized air available at PETRA III. The microfluidic controller and TapeDrive are controlled through a notebook that can be operated remotely from the hutch. TapeDrive is mounted on the motors that otherwise move the goniometer.

IUCrJ
Volume 9| Part 6| November 2022| Pages 778-791
ISSN: 2052-2525
https://doi.org/10.1107/S2052252522010193