Buy article online - an online subscription or single-article purchase is required to access this article.
Download citation
Download citation
link to html
Hydrogen bonds are considered a powerful organizing force in designing supra­molecular architectures because they are directional, selective and reversible at room temperature. trans-Di­thio­cyanato­tetra­kis­(4-vinyl­pyridine)­nickel(II) is a popular host for the inclusion of small mol­ecules and 2,3,5,6-tetra­fluoro-1,4-di­iodo­benzene (TFDIB) represents a strong halogen-bond donor. These constituents cocrystallize in a 1:1 stoichiometry, [Ni(NCS)2(C7H7N)4]·C6F4I2, in the tetra­gonal space group I41/a. Both residues occupy special positions, i.e. the pseudo-octa­hedral NiII complex is located on a twofold axis and the TFDIB mol­ecule sits about a crystallographic centre of inversion. The components inter­act via a short S...I contact of 3.2891 (12) Å between the thio­cyanate S atom of the host and the iodine substituent at the perhalogenated aromatic ring of the smaller guest mol­ecule. This inter­action meets the commonly accepted criteria for a halogen bond. Such halogen bonds to sulfur are significantly less common than to smaller electronegative atoms.

Supporting information

cif

Crystallographic Information File (CIF) https://doi.org/10.1107/S2053229615019002/yp3107sup1.cif
Contains datablocks I, global

hkl

Structure factor file (CIF format) https://doi.org/10.1107/S2053229615019002/yp3107Isup2.hkl
Contains datablock I

CCDC reference: 1430361

Introduction top

Crystal engineering deals with competition, co-operation and balance between different inter­molecular forces in extended crystal structures (Aakeroy, 1997; Steiner, 2002; Desiraju, 2014; Deringer et al., 2014; Thakur et al., 2015).

Hydrogen bonds are considered a powerful organizing force in designing supra­molecular architectures because they are directional, selective and reversible at room temperature.

Halogen bonding implies a directional inter­action between an electron-density donor (a neutral or anionic Lewis base with an N, O, S, P or halogen functionality) and a (usually heavy) halogen atom as electrophile. Halogen bonds have been defined by Mate Erdélyi in his tutorial review (Erdélyi, 2012) as `the cement to assemble molecules into supra­molecular architectures' (Metrangolo & Resnati, 2001; Metrangolo et al., 2008; Wang et al., 2012, 2013; Erdélyi, 2012; Pan et al., 2015). Halogen bonds in which an S atom is the formal acceptor, i.e. it acts as a lone-pair donor towards the σ hole of a heavy halide, are quite rare. For S···I contacts, the Camdridge Structural Database (CSD, Version 5.36, including updates of November 2014, 717876 entries; Groom & Allen, 2014) lists only 17 occurrences for C—S···I—C with S···I < 3.4 Å. It goes without explicit literature citation that this infrequency is in marked contrast with the many examples of short N···X or O···X (X = Cl, Br or I) contacts.

We expected to design a representative for such a rare S···I halogen bond by combining two particularly suitable constituents in a cocrystal. For the sulfur halogen-bond acceptor group, we chose di­thio­cyanato­tetra­kis(4-vinyl­pyridine)­nickel(II). This NiII complex is suitable for cocrystal formation; according to Moore and co-workers, the reason is the remarkable rotational freedom of the pyridine rings about their Ni—N bonds, which allows the molecule to adjust its shape to accommodate various guest molecules of different shape, size and polarity. Moreover, the iso­thio­cyanate group allows a secondary inter­action between the S atom and the nonmetallic elements of the guest molecules (Moore et al., 1987; Nassimbeni et al., 1989).

This pseudo-o­cta­hedral complex was originally described by Lipkowski et al. (1984) and Nassimbeni & coworkers (Moore et al.,1986); the latter group used it as host to accomodate a variety of small guest molecules, such as: (i) p-xylene, m-xylene and o-xylene (Moore et al.,1986; CSD refcodes FINCOU, FINCUA and FINDAH, respectively) or chloro­form (Moore et al., 1987; refcode FOCDEG); (ii) cyclo­hexane and tetra­hydro­furan; 1,3-cyclo­hexadiene and tetra­hydro­furan; 1,4-cyclo­hexadiene and tetra­hydro­furan; benzene and tetra­hydro­furan, benzene or tetra­hydro­furan (Lavelle & Nassimbeni, 1993; CSD refcodes PIZLOZ, PIZMAM, PIZMIU, PIZMOA, PIZMUG and PIZNAN, respectively); (iii) tetra­chloro­methane or tri­iodo­methane (Nassimbeni et al., 1989; CSD refcodes VAXVAR, VAXVEV and VAXVIZ, respectively).

Tetra­fluoro­diiodo­benzene (TFDIB) meets the requirements for a good halogen-bond donor through its iodo substituents towards nucleophiles such as the S atom from the iso­thio­cyanate ligand. Our group has used TFDIB for the construction of cocrystals in which hydrogen and halogen bonds of different strengths co-exist with coordinative bonds (Merkens et al., 2013).

The present contribution deals with the successful cocrystallization of di­thio­cyanato­tetra­kis(4-vinyl­pyridine)­nickel(II), [Ni(NCS)2(4ViPy)4], and TFDIB. In the resulting adduct, (1) (see scheme), the iso­thio­cyanate S atom acts as electron-density donor or halogen-bond acceptor.

Experimental top

Synthesis and crystallization top

Chemicals were used as supplied without further purification. The powder X-ray diffraction (PXRD) pattern was recorded at the Institute of Inorganic Chemistry, RWTH Aachen University, using a Stoe IP-PSD imaging-plate detector. A flat sample was measured in transmission using Cu Kα1 radiation at ambient temperature. Nickel(II) thio­cyanate was prepared according to the procedure described by Sarma & Poddar (1984). Di­thio­cyanato­tetra­kis(4-vinyl­pyridine)­nickel(II), [Ni(NCS)2(4ViPy)4], was prepared following the procedure of Moore et al. (1986).

For the preparation of (1), [Ni(NCS)2(4ViPy)4] (0.1 mmol, 59.5 mg) and 2,3,5,6-tetra­fluoro-1,4-di­iodo­benzene (0.1 mmol, 40.18 mg) were dissolved in ethanol (6 ml) at room temperature. Blue crystals of (1) were obtained from the resulting solution by partial evaporation at room temperature overnight. The phase purity of the product was confirmed by powder X-ray diffraction (see Fig. 1).

Refinement top

Crystal data, data collection and structure refinement details are summarized in Table 1. Crystal data, data collection and structure refinement details are summarized in Table 1. H atoms attached to C atoms were calculated, introduced in their idealized positions and treated as riding, with C—H = 0.95 Å and Uiso(H) = 1.2Ueq(C).

Results and discussion top

The title compound, (1), crystallizes in the centrosymmetric tetra­gonal space group I41/a with half a molecule of di­thio­cyanato­tetra­kis(4-vinyl­pyridine)­nickel(II), [Ni(NCS)2(4ViPy)4], and half a molecule of 2,3,5,6-tetra­fluoro-1,4-di­iodo­benzene (TFDIB) in the asymmetric unit. The larger coordination compound can be perceived as host; it is situated on a twofold crystallographic axis, with the Ni atom on Wyckoff position 8e, whereas the centre of gravity of the perhalogenated guest coincides with a centre of inversion.

The NiII cation is coordinated by six N atoms, four from the 4-vinyl­pyridine (4ViPy) ligands in equatorial positions and two from the iso­thio­cyanate (NCS) ligands in axial positions (Fig. 2). The Ni—N distances range from 2.084 (3) to 2.118 (3) Å (Table 2). The Ni—N bonds to the iso­thio­cyanate ligands are shorter than those to the pyridine ligands, as reported previously for this type of compound (Roy et al., 2007; Lavelle & Nassimbeni, 1993; Moore et al., 1987; Miklovic et al., 2004).

The complex molecule adopts a four-blade propeller geometry. The four torsion angles of the 4-vinyl­pyridine ligands (N1—Ni1—Nx1—Cx2) differ only slightly from each other and adopt the following values: N1—Ni1—N2—C5 = -139.8 (3)°, N1—Ni1—N2i—C5i = 41.5 (3)°, N1—Ni1—N3—C8 = -134.1 (3)° and N1—Ni1—N3i—C8i = 44.7 (3)° [symmetry code: (i) -x, -y + 1/2, z].

The iso­thio­yanate ligand is significantly bent at the N-atom position, with an Ni—N—C angle of 157.1 (3)°. The two NCS ligands in a trans geometry are not coplanar but subtend a C—N···N—C angle of 9.9 (2)°.

The iodine substituents in the TFDIB residue are suitable halogen-bond donors towards nucleophiles such as the terminal S atom from the iso­thio­cyanate ligands. TFDIB has been used successfully as an electrophilic component in short halogen bonds with pyridine derivatives (Roper et al., 2010; Sgarbossa et al., 2012; Merkens et al., 2013).

According to Desiraju and co-workers (Thalladi et al., 1998; Thakur et al., 2015), in the absence of strong hydrogen bonds, weak inter­molecular inter­actions are very important for the overall crystal packing. This is true in the crystal structure of (1), which is stabilized through very short S···I halogen bonds of 3.2891 (12) Å, considerably shorter than the sum of the common van der Waals radii, i.e. I 1.98 Å and S 1.80 Å (Batsanov, 2001). Hirshfeld surfaces (Hirshfeld, 1977; Wolff et al., 2010) allow the visualization of the relevant inter­molecular contacts. They are presented in Figs. 3(a) and 3(b) for both residues of (1); the short S···I inter­action corresponds to the pronounced red spot on the surface.

A histogram of S···I contacts allows the classification of the halogen bond in (1) as unusually short. Fig. 4 shows that the vast majority of inter­molecular S···I contacts retrieved from the CSD are associated with distances longer than 3.4 Å.

Inter­atomic distances do not represent the only criteria for halogen bonds: Nassimbeni and co-workers (Nassimbeni et al., 1989; Lavelle & Nassimbeni, 1993) have already described two alternative geometries in which `secondary bonding' between an iso­thio­cyanate S atom and an I atom of the guest can occur. Either the (NiNC)—S···I or the S···I—C angle should be approximately linear. In the case of (1), the latter amounts to 164.20 (13)° and thus matches the expected geometry for a halogen bond, with the S atom approaching the σ hole at the I atom opposite the aryl C—I bond.

Space-filling in cocrystal (1) is efficient: its density of 1.758 Mg m-3 is significantly higher than that for unsolvated α-[Ni(NCS)2(4ViPy)4] with a density of 1.3 Mg m-3 (Lipkowski et al., 1984). The packing for (1) does not show any relevant voids: the cocrystal is associated with a packing index of 68.9%, whereas a hypothetical unsolvated guest structure (Fig. 5) would correspond to a much more close-packed solid with 53.1% space filling.

Alternatively, the packing density can be expressed as the ratio (volume of the unit cell):(number of non-H atoms in the unit cell). When such a comparison is made for (1) with clathrates reported by Moore et al. (1986) or Lavelle & Nassimbeni (1993), it confirms that our compound is more efficiently packed than the clathrates reported earlier [Is it worth giving the specific numbers here?].

Conclusion top

A coordination complex prone to encapsulating small guest molecules and tetra­fluoro­diiodo­benzene, a well-established halogen-bond donor, have been cocrystallized. These particularly well suited residues subtend an unusually short S···I contact. Future work will focus on aspects beyond molecular geometry. We will attempt to grow crystals suitable for high-resolution diffraction experiments, perform multipole refinements and analyze the resulting experimental electron density in terms of Bader's AIM (atoms in molecules) theory (Bader, 1990). Very short inter­molecular contacts can be associated with significant electron density in the bond critical point (Wang et al., 2013).

Computing details top

Data collection: SMART (Bruker, 2001); cell refinement: SAINT-Plus (Bruker, 2009); data reduction: SAINT-Plus (Bruker, 2009); program(s) used to solve structure: SHELXS97 (Sheldrick, 2008); program(s) used to refine structure: SHELXL2014 (Sheldrick, 2015); molecular graphics: PLATON (Spek, 2009); software used to prepare material for publication: SHELXL97 (Sheldrick, 2008).

Figures top
[Figure 1] Fig. 1. Experimental (blue) and simulated (red) X-ray powder diffractograms of (1).
[Figure 2] Fig. 2. PLATON (Spek, 2009) plot of the residues in (1), showing the atomic numbering scheme. [Displacement ellipsoids are drawn at the ??% probability level.] H atoms have been omitted for clarity. The residues are not shown in the same view direction to avoid overlap. [Symmetry codes: (i) -x, -y + 1/2, z; (ii) -x, -y, -z + 2.]
[Figure 3] Fig. 3. Hirshfeld surfaces (Wolff et al., 2010) for (a) the 2,3,5,6-tetrafluoro-1,4-diiodobenzene residue and (b) the [Ni(NCS)2(4ViPy)4] residue in (1).
[Figure 4] Fig. 4. Histogram of S···I contacts found in the CSD. The arrow indicates the S···I halogen bond distance in (1).
[Figure 5] Fig. 5. Hypothetical cavities in cocrystal (1) when only host molecules are taken into account and TFDIB guests have been omitted.
trans-Tetrakis(4-vinylpyridine-κN)bis(thiocyanato-κN)nickel(II)–2,3,5,6-tetrafluoro-1,4-diiodobenzene (1/1) top
Crystal data top
[Ni(NCS)2(C7H7N)4]·C6F4I2Dx = 1.758 Mg m3
Mr = 997.27Mo Kα radiation, λ = 0.71073 Å
Tetragonal, I41/aθ = 2.5–20.0°
a = 16.2034 (14) ŵ = 2.32 mm1
c = 28.698 (2) ÅT = 100 K
V = 7534.6 (14) Å3Block, blue
Z = 80.13 × 0.12 × 0.10 mm
F(000) = 3904
Data collection top
Bruker SMART CCD area-detector
diffractometer
2947 reflections with I > 2σ(I)
Radiation source: Incoatec microsourceRint = 0.065
ω scansθmax = 26.5°, θmin = 2.5°
Absorption correction: multi-scan
(SADABS; Bruker, 2008)
h = 1820
Tmin = 0.622, Tmax = 0.745k = 2020
22801 measured reflectionsl = 2635
3877 independent reflections
Refinement top
Refinement on F2Primary atom site location: structure-invariant direct methods
Least-squares matrix: fullSecondary atom site location: difference Fourier map
R[F2 > 2σ(F2)] = 0.036Hydrogen site location: inferred from neighbouring sites
wR(F2) = 0.077H-atom parameters constrained
S = 1.03 w = 1/[σ2(Fo2) + (0.0276P)2]
where P = (Fo2 + 2Fc2)/3
3877 reflections(Δ/σ)max = 0.006
231 parametersΔρmax = 0.79 e Å3
0 restraintsΔρmin = 1.00 e Å3
Crystal data top
[Ni(NCS)2(C7H7N)4]·C6F4I2Z = 8
Mr = 997.27Mo Kα radiation
Tetragonal, I41/aµ = 2.32 mm1
a = 16.2034 (14) ÅT = 100 K
c = 28.698 (2) Å0.13 × 0.12 × 0.10 mm
V = 7534.6 (14) Å3
Data collection top
Bruker SMART CCD area-detector
diffractometer
3877 independent reflections
Absorption correction: multi-scan
(SADABS; Bruker, 2008)
2947 reflections with I > 2σ(I)
Tmin = 0.622, Tmax = 0.745Rint = 0.065
22801 measured reflections
Refinement top
R[F2 > 2σ(F2)] = 0.0360 restraints
wR(F2) = 0.077H-atom parameters constrained
S = 1.03Δρmax = 0.79 e Å3
3877 reflectionsΔρmin = 1.00 e Å3
231 parameters
Special details top

Geometry. All e.s.d.'s (except the e.s.d. in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell e.s.d.'s are taken into account individually in the estimation of e.s.d.'s in distances, angles and torsion angles; correlations between e.s.d.'s in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell e.s.d.'s is used for estimating e.s.d.'s involving l.s. planes.

Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2) top
xyzUiso*/Ueq
Ni10.00000.25000.78471 (2)0.01796 (15)
S10.11466 (6)0.02162 (6)0.77532 (4)0.0328 (3)
N10.07587 (17)0.14614 (18)0.78356 (10)0.0202 (7)
N20.07433 (17)0.19832 (17)0.83794 (10)0.0178 (6)
N30.07086 (17)0.30733 (17)0.73194 (10)0.0191 (7)
C10.0871 (2)0.1165 (2)0.84181 (13)0.0217 (8)
H10.06890.08140.81730.026*
C20.1256 (2)0.0816 (2)0.88005 (13)0.0232 (8)
H20.13390.02360.88120.028*
C30.1522 (2)0.1308 (2)0.91691 (12)0.0214 (8)
C40.1408 (2)0.2151 (2)0.91201 (12)0.0211 (8)
H40.15970.25160.93560.025*
C50.1020 (2)0.2462 (2)0.87280 (12)0.0209 (8)
H50.09470.30420.87040.025*
C60.1881 (2)0.0927 (2)0.95838 (13)0.0269 (9)
H60.20410.03650.95590.032*
C70.2004 (2)0.1291 (3)0.99889 (14)0.0350 (10)
H7A0.18540.18531.00300.042*
H7B0.22420.09911.02400.042*
C80.0340 (2)0.3445 (2)0.69534 (12)0.0222 (8)
H80.02450.34870.69540.027*
C90.0764 (2)0.3768 (2)0.65782 (13)0.0242 (9)
H90.04720.40150.63270.029*
C100.1621 (2)0.3729 (2)0.65694 (13)0.0240 (8)
C110.1999 (2)0.3365 (2)0.69524 (14)0.0266 (9)
H110.25840.33330.69670.032*
C120.1529 (2)0.3049 (2)0.73121 (13)0.0251 (9)
H120.18070.28010.75680.030*
C130.2112 (3)0.4051 (2)0.61799 (15)0.0368 (11)
H130.26950.40060.62050.044*
C140.1824 (3)0.4394 (3)0.58024 (15)0.0462 (12)
H14A0.12450.44540.57610.055*
H14B0.21920.45850.55690.055*
C150.0925 (2)0.0770 (2)0.78008 (12)0.0220 (8)
I10.06962 (2)0.03854 (2)1.11334 (2)0.03788 (11)
F10.06105 (14)0.12477 (14)0.94756 (8)0.0441 (7)
F20.00803 (16)0.15593 (15)1.03344 (9)0.0478 (7)
C160.0313 (2)0.0619 (3)0.97335 (15)0.0336 (10)
C170.0285 (2)0.0164 (3)1.04525 (14)0.0333 (10)
C180.0037 (2)0.0788 (3)1.01741 (16)0.0347 (10)
Atomic displacement parameters (Å2) top
U11U22U33U12U13U23
Ni10.0152 (3)0.0198 (3)0.0189 (4)0.0001 (3)0.0000.000
S10.0331 (6)0.0248 (5)0.0404 (7)0.0060 (4)0.0020 (5)0.0011 (5)
N10.0175 (15)0.0241 (17)0.0190 (18)0.0004 (12)0.0003 (13)0.0001 (13)
N20.0164 (15)0.0168 (15)0.0203 (18)0.0013 (12)0.0014 (12)0.0028 (13)
N30.0170 (15)0.0226 (16)0.0178 (18)0.0005 (12)0.0003 (13)0.0007 (13)
C10.0191 (18)0.0201 (18)0.026 (2)0.0005 (15)0.0011 (16)0.0043 (16)
C20.0186 (18)0.0188 (18)0.032 (2)0.0044 (14)0.0021 (16)0.0011 (16)
C30.0151 (17)0.0239 (19)0.025 (2)0.0014 (15)0.0008 (15)0.0050 (16)
C40.0204 (19)0.0240 (19)0.019 (2)0.0011 (15)0.0009 (15)0.0042 (15)
C50.0247 (19)0.0180 (18)0.020 (2)0.0017 (15)0.0019 (16)0.0004 (15)
C60.0205 (19)0.028 (2)0.032 (3)0.0029 (16)0.0036 (17)0.0113 (18)
C70.032 (2)0.037 (2)0.035 (3)0.0012 (19)0.009 (2)0.010 (2)
C80.0168 (18)0.026 (2)0.024 (2)0.0001 (15)0.0017 (15)0.0009 (16)
C90.031 (2)0.0215 (19)0.020 (2)0.0017 (16)0.0036 (17)0.0009 (16)
C100.029 (2)0.0189 (19)0.024 (2)0.0052 (16)0.0103 (17)0.0042 (16)
C110.0189 (19)0.022 (2)0.039 (3)0.0003 (15)0.0050 (17)0.0007 (17)
C120.0175 (18)0.028 (2)0.030 (2)0.0020 (15)0.0003 (16)0.0005 (17)
C130.044 (3)0.024 (2)0.042 (3)0.0025 (18)0.021 (2)0.003 (2)
C140.073 (4)0.033 (3)0.033 (3)0.016 (2)0.020 (2)0.005 (2)
C150.0154 (18)0.033 (2)0.017 (2)0.0035 (16)0.0006 (15)0.0003 (17)
I10.02717 (15)0.04786 (19)0.0386 (2)0.00369 (12)0.00040 (12)0.01396 (14)
F10.0450 (15)0.0412 (15)0.0461 (16)0.0175 (12)0.0013 (12)0.0217 (12)
F20.0542 (17)0.0403 (15)0.0488 (17)0.0080 (12)0.0012 (13)0.0109 (12)
C160.023 (2)0.042 (3)0.036 (3)0.0099 (18)0.0029 (18)0.022 (2)
C170.024 (2)0.044 (3)0.032 (3)0.0037 (18)0.0043 (18)0.018 (2)
C180.026 (2)0.032 (2)0.046 (3)0.0025 (18)0.004 (2)0.012 (2)
Geometric parameters (Å, º) top
Ni1—N12.084 (3)C7—H7A0.9500
Ni1—N1i2.084 (3)C7—H7B0.9500
Ni1—N3i2.115 (3)C8—C91.380 (5)
Ni1—N22.118 (3)C8—H80.9500
Ni1—N32.115 (3)C9—C101.391 (5)
Ni1—N2i2.118 (3)C9—H90.9500
S1—C151.643 (4)C10—C111.389 (5)
N1—C151.157 (4)C10—C131.468 (5)
N2—C51.343 (4)C11—C121.381 (5)
N2—C11.346 (4)C11—H110.9500
N3—C121.331 (4)C12—H120.9500
N3—C81.350 (4)C13—C141.304 (6)
C1—C21.384 (5)C13—H130.9500
C1—H10.9500C14—H14A0.9500
C2—C31.393 (5)C14—H14B0.9500
C2—H20.9500I1—C172.096 (4)
C3—C41.385 (5)F1—C161.349 (4)
C3—C61.461 (5)F2—C181.334 (5)
C4—C51.384 (5)C16—C181.369 (6)
C4—H40.9500C16—C17ii1.377 (6)
C5—H50.9500C17—C16ii1.377 (6)
C6—C71.319 (5)C17—C181.390 (5)
C6—H60.9500
N1—Ni1—N1i178.17 (16)C7—C6—C3126.1 (4)
N1—Ni1—N3i87.37 (11)C7—C6—H6116.9
N1i—Ni1—N3i91.32 (11)C3—C6—H6116.9
N1—Ni1—N391.32 (11)C6—C7—H7A120.0
N1i—Ni1—N387.37 (11)C6—C7—H7B120.0
N3i—Ni1—N388.56 (15)H7A—C7—H7B120.0
N1—Ni1—N291.59 (11)N3—C8—C9123.8 (3)
N1i—Ni1—N289.73 (11)N3—C8—H8118.1
N3i—Ni1—N291.95 (10)C9—C8—H8118.1
N3—Ni1—N2177.07 (11)C8—C9—C10119.6 (3)
N1—Ni1—N2i89.73 (11)C8—C9—H9120.2
N1i—Ni1—N2i91.59 (11)C10—C9—H9120.2
N3i—Ni1—N2i177.07 (11)C11—C10—C9116.4 (3)
N3—Ni1—N2i91.95 (10)C11—C10—C13121.0 (4)
N2—Ni1—N2i87.69 (15)C9—C10—C13122.6 (4)
C15—N1—Ni1157.0 (3)C12—C11—C10120.4 (3)
C5—N2—C1117.1 (3)C12—C11—H11119.8
C5—N2—Ni1119.9 (2)C10—C11—H11119.8
C1—N2—Ni1122.4 (2)N3—C12—C11123.5 (4)
C12—N3—C8116.3 (3)N3—C12—H12118.3
C12—N3—Ni1122.7 (2)C11—C12—H12118.3
C8—N3—Ni1120.9 (2)C14—C13—C10126.1 (4)
N2—C1—C2122.5 (3)C14—C13—H13116.9
N2—C1—H1118.7C10—C13—H13116.9
C2—C1—H1118.7C13—C14—H14A120.0
C1—C2—C3120.5 (3)C13—C14—H14B120.0
C1—C2—H2119.7H14A—C14—H14B120.0
C3—C2—H2119.7N1—C15—S1179.2 (4)
C4—C3—C2116.5 (3)F1—C16—C18118.2 (4)
C4—C3—C6123.5 (3)F1—C16—C17ii119.7 (4)
C2—C3—C6120.0 (3)C18—C16—C17ii122.1 (4)
C5—C4—C3120.2 (3)C16ii—C17—C18117.4 (4)
C5—C4—H4119.9C16ii—C17—I1120.6 (3)
C3—C4—H4119.9C18—C17—I1122.1 (3)
N2—C5—C4123.2 (3)F2—C18—C16119.3 (4)
N2—C5—H5118.4F2—C18—C17120.2 (4)
C4—C5—H5118.4C16—C18—C17120.5 (4)
Symmetry codes: (i) x, y+1/2, z; (ii) x, y, z+2.

Experimental details

Crystal data
Chemical formula[Ni(NCS)2(C7H7N)4]·C6F4I2
Mr997.27
Crystal system, space groupTetragonal, I41/a
Temperature (K)100
a, c (Å)16.2034 (14), 28.698 (2)
V3)7534.6 (14)
Z8
Radiation typeMo Kα
µ (mm1)2.32
Crystal size (mm)0.13 × 0.12 × 0.10
Data collection
DiffractometerBruker SMART CCD area-detector
diffractometer
Absorption correctionMulti-scan
(SADABS; Bruker, 2008)
Tmin, Tmax0.622, 0.745
No. of measured, independent and
observed [I > 2σ(I)] reflections
22801, 3877, 2947
Rint0.065
(sin θ/λ)max1)0.627
Refinement
R[F2 > 2σ(F2)], wR(F2), S 0.036, 0.077, 1.03
No. of reflections3877
No. of parameters231
H-atom treatmentH-atom parameters constrained
Δρmax, Δρmin (e Å3)0.79, 1.00

Computer programs: SMART (Bruker, 2001), SAINT-Plus (Bruker, 2009), SHELXS97 (Sheldrick, 2008), SHELXL2014 (Sheldrick, 2015), PLATON (Spek, 2009), SHELXL97 (Sheldrick, 2008).

Selected geometric parameters (Å, º) top
Ni1—N12.084 (3)Ni1—N32.115 (3)
Ni1—N22.118 (3)
N1—Ni1—N1i178.17 (16)N3—Ni1—N2177.07 (11)
N1—Ni1—N391.32 (11)N1—Ni1—N2i89.73 (11)
N3i—Ni1—N388.56 (15)
Symmetry code: (i) x, y+1/2, z.
 

Subscribe to Acta Crystallographica Section C: Structural Chemistry

The full text of this article is available to subscribers to the journal.

If you have already registered and are using a computer listed in your registration details, please email support@iucr.org for assistance.

Buy online

You may purchase this article in PDF and/or HTML formats. For purchasers in the European Community who do not have a VAT number, VAT will be added at the local rate. Payments to the IUCr are handled by WorldPay, who will accept payment by credit card in several currencies. To purchase the article, please complete the form below (fields marked * are required), and then click on `Continue'.
E-mail address* 
Repeat e-mail address* 
(for error checking) 

Format*   PDF (US $40)
   HTML (US $40)
   PDF+HTML (US $50)
In order for VAT to be shown for your country javascript needs to be enabled.

VAT number 
(non-UK EC countries only) 
Country* 
 

Terms and conditions of use
Contact us

Follow Acta Cryst. C
Sign up for e-alerts
Follow Acta Cryst. on Twitter
Follow us on facebook
Sign up for RSS feeds