view article
Figure 1
Reduction in the number of X-rays counted as the time difference between two successive pulses is decreased. The horizontal axis is time and the vertical axis is the signal. The signal is given by the sum of the individual pulses (shown as dotted lines). UL is the upper-level setting for the SCA and LL is the lower-level setting. The arrows indicate pulses that are successfully counted. A pulse is counted when the signal goes from below to above LL and then returns below LL again without having gone above UL.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 10| Part 3| April 2003| Pages 214-218
doi:10.1107/S0909049503002668
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS