view article
Figure 4
The NSLS X9 beamline was especially designed to acquire both SAXS and WAXS X-ray scattering data from a single exposure. The top-left panel indicates the position of the WAXS and the SAXS detectors relative to the X-ray beam. The top-right panel is a view from the X-ray beam in the direction of the detectors. This view indicates the overlapping region, which can be seen from the SAXS images (bottom-right panel, left image) cover by the WAXS detector (bottom-right panel, right image). The SAXS and WAXS data overlap between ∼0.12 and 0.2 Å−1 and are background-subtracted and combined automatically using beamline software, as shown by the data collected from a 3.7 mg ml−1 lysozyme solution (bottom-left).

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 18| Part 1| November 2011| Pages 41-44
doi:10.1107/S0909049510036022
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS