view article
Figure 9
(a) Photograph of the experiment set-up for the divergence measurement taken in the hutch of the R&D NSLS-II beamline at NSLS (X16A). (i) Ionization chamber, (ii) L-shaped mirror, (iii) x/y slits, (iv) Si 333, (v) scintillation detector. (b) Divergence measurements without the mirror (opened circles) and with the mirror (opened squares). (c) Calculated bandwidth contribution for the Si 333 measured rocking curves where θ is the diffraction angle (refraction corrected) and θB is the Bragg angle.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 18| Part 6| September 2011| Pages 862-870
doi:10.1107/S0909049511031098
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS