view article
Figure 1
(a) CAD of the setup showing a typical arrangement. Components are labeled as (i) CCD camera, (ii) lens tube, (iii) drilled objective, (iv) rotary shutter, (v) rotary shutter with filter holder insert, (vi) ring light, (vii) stages and (viii) sample holder. Supporting elements have been removed for clarity. (b) Close-up of insert to convert rotary shutter into a filter holder. Photographs of (c) setup offline and (d) at XPP, LCLS.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 22| Part 6| October 2015| Pages 1372-1378
doi:10.1107/S1600577515016938
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS