view article
Figure 1
SAXS intensity of a water-filled borosilicate capillary of a stopped-flow device as a function of the wavevector transfer Q measured at the Austrian SAXS beamline at ELETTRA. The red circles show the measured background intensity of a clean capillary (after rinsing with a diluted HCl solution and water), while the green triangles show data after 40 injection cycles [c(CdS) = 6.25 mM = c(EDTA)] and cleaning with water after the last cycle. The difference between the two data sets originates from CdS coating of the capillary. Note that there is also a faint yellow colouration visible on the capillary. The time between each injection was 140 s; the exposure times of both SAXS data sets were 10 s.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 23| Part 2| March 2016| Pages 545-550
doi:10.1107/S1600577515023826
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS