view article
Figure 1
Experimental and fitted decay curves collected on beamline I12, DLS, with the 55 keV beam in the 686-bunch mode. Data for each scintillator are shown in a separate sub-plot. Experimental data are shown in blue. In each case, the intensity range of the curve has been normalized to its maximum, collapsing the values to the range of 0–1 to aid comparison between the different materials. The modelled data, using the constants in Table 2[link], are shown in red. The bottom sub-plot shows an illustration of the 686-bunch mode, indicating when the X-rays were incident on the crystal. Dashed grey lines mark the start and end of the 686-bunch train on the experimental and modelled curves. All three experimental scans comprised 1000 frames over 2550 ns with a 5 ns exposure time.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 23| Part 3| May 2016| Pages 685-693
doi:10.1107/S1600577516002770
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS