P13 ancillary facilities. (a) Drawing of the detector table with vertical 2Θ-arm. (b) Diffraction resolution versus energy at the edge of the PILATUS 6M-F at 2Θ = 0° (full line) and at 2Θ = 25° (dashed line). (c) PILATUS 6M-F equipped with the helium cone assembly. (d) Back panel of the DECTRIS PILATUS 6M-F with the standard N2 gas inlet highlighted, used also to vent the complete detector with helium gas. (e) Detail of the sample position with helium cone assembly on; the post-sample air gap is reduced to 30 mm at the closest sample-to-detector distance of 135 mm. (f) EMBL derivative laboratory (DLab) located about 15 m away from the beamline.