view article
Figure 1
Schematic diagram with some of the key IMBL components: (a) the front-end (FE) to hutch 1B; (b) hutch 1B to hutch 2B; (c) the short transfer line (STL) to hutch 3B. Both pink-beam and monochromatic-beam (coloured green) scenarios are displayed. There are different (typical) experimental set-ups in hutches 1B, 2B and 3B: `step-and-shoot' mode radiotherapy, (pink-beam) tomography, and fast (monochromatic beam) imaging of large samples, respectively. The large horizontal cylinders indicate where the X-ray beam is always in vacuo. The beamline photon and safety shutters, located immediately upstream and downstream of the fast (MRT) shutter in hutch 1A, respectively, have not been shown here. The distances of key components from the source are shown near the bottom in red. Further details are provided in the text.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 24| Part 1| January 2017| Pages 110-141
https://doi.org/10.1107/S1600577516015563
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS