Quantitative characterization of the X-ray beam at the Australian Synchrotron Imaging and Medical Beamline (IMBL)

Stevenson, A.W.; Crosbie, J.C.; Hall, C.J.; Häusermann, D.; Livingstone, J.; Lye, J.E.

doi:10.1107/S1600577516015563

Journal of Synchrotron Radiation Journal of
Synchrotron Radiation

IUCr IT WDC

home archive editors for authors for readers submit subscribe open access

view article

Figure 5
Dose-rate distribution for the SCMPW 3.00 T case. The in vacuo filters were 0.45 mm graphene, $[15\sqrt2]$ mm HD graphite and $[2\sqrt2]$ mm Cu (referred to as F4 previously), and the fixed filters consisted of 74 mm He path, 1.8 m air path, 0.35 mm Be window, and 38 µm Al foil. Note that the horizontal and vertical scales are quite different. The small grey rectangle represents 12 mm (H) × 1 mm (V). Other relevant parameter values were 3.032 GeV, 200 mA, 22.3 m from the source. Emittance effects were included. Component distributions were calculated from 1 to 999 keV in steps of 2 keV. The calculation steps were 0.1 mm horizontally and 0.01 mm vertically.

JOURNAL OF
SYNCHROTRON
RADIATION

ISSN: 1600-5775

Volume 24| Part 1| January 2017| Pages 110-141

https://doi.org/10.1107/S1600577516015563

Follow J. Synchrotron Rad.

Search IUCr Journals		doi		Advanced search
Author		volume	page