view article

Figure 1
Schematic view of the X-ray chopper design used at SPring-8. Two different groove depths are machined, allowing two different repetition frequencies to be selected by aligning the X-ray beam axis above or below the plane defined by the broken line shown. Eight pairs for the air-spindle type and five and ten pairs for the magnetic-bearing type are grooved.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Follow J. Synchrotron Rad.
Sign up for e-alerts
Follow J. Synchrotron Rad. on Twitter
Follow us on facebook
Sign up for RSS feeds