view article
Figure 4
Schematic of the sample holder assembly for mounting of protein crystals (units are mm). The holder contains a magnetic base, a pin (both made of copper) and a sample mount which is made of thin dielectric film (10–20 µm) with low X-ray absorption/scattering.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 24| Part 3| May 2017| Pages 636-645
https://doi.org/10.1107/S1600577517003484
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS