view article
Figure 6
Results obtained from the X-ray absorption measurements: total absorbed power (a and b), fraction of absorbed power (c and d) and average gas temperature (e and f) as a function of gas pressure. The results for each experimental campaign are shown separately: parts (a), (c) and (e) correspond to the OES setup (1.46 m length of attenuator) where argon and krypton were used, and parts (b), (d) and (f) correspond to the TLAS setup (50.8 m length of attenuator) where only argon was used. The keys shown in the two top plots of each column indicate the X-ray beam size, undulator gap (related to the spectrum), X-ray beam power and, for plots (a), (c) and (e), the gas used.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 24| Part 6| November 2017| Pages 1195-1208
https://doi.org/10.1107/S1600577517012000
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS