view article

Figure 1
Schematic view of the experimental setup. The diffraction pattern from the (100) surface was detected in the forward direction with respect to the incoming X-rays. The laser sheet, with a wavelength of 2.7 µm, used to probe the CO2 gas phase, was sent through the reactor at an angle of approximately 45° relative to the X-rays. The camera for CO2 detection was positioned perpendicular to the laser sheet. In addition, an MS was connected to the outlet of the reactor to measure the global gas concentration.

Journal logoJOURNAL OF
ISSN: 1600-5775
Follow J. Synchrotron Rad.
Sign up for e-alerts
Follow J. Synchrotron Rad. on Twitter
Follow us on facebook
Sign up for RSS feeds