journal menu
![[Figure 2]](rv5100fig2mag.jpg)
|
|
Figure 2
Overview of the experimental setup. (a) Device and fluidic connections. The sample flows in the center channel and the buffer flows in the side channels. The microcrystalline slurry sample is placed in a sample reservoir on an anti-settling device. The sample flow is controlled by injection of water into the reservoir which hydraulically flows the sample into the device. (b) The polyimide metal device showing the attached nanoports for fluid connections. (c) Schematic view of a 10:1 flow-focusing of the sample by the buffer (total flow rate 330 µl h−1). The cross-sectional area of the device channel is 300 µm × 300 µm and the width of the flow-focused stream is roughly 40 µm. The crystal size and X-ray spot size are shown to scale. The sample is irradiated through the volume of water encapsulated by polyimide windows. |
![[Figure 2]](rv5100fig2.jpg)
 | JOURNAL OF SYNCHROTRON RADIATION |
ISSN: 1600-5775
