view article
Figure 3
Top: sketch (not to scale) of the wire layout within the diamond plate. For clarity, the `bias' electrodes are coloured red and the `measurement' electrodes are coloured blue. A black dotted line indicates the region of the cross-section presented. Bottom: cross-section through the diamond plate. The location of the surface metallization at the edge of the detector is shown.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 27| Part 3| May 2020| Pages 599-607
https://doi.org/10.1107/S160057752000140X
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS