view article
Figure 3
Example of the power density implementation in OASYS: the looping mechanism is extended by a new looping point capable of sampling the energy spectrum calculated by XOPPY and sending the obtained energy intervals to the new undulator widget. The undulator widget generates rays based on the spatial and angular probability distribution of the radiation calculated by SRW. The rays are then used to compute the power density at several locations of the beamline by using the new plotting widgets: at the front-end mask (transmitted power), on the surface of the ellipsoid mirror (transmitted and absorbed power), and at the focus where a beam defining aperture (BDA) is located (incident power).

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 27| Part 5| September 2020| Pages 1108-1120
https://doi.org/10.1107/S160057752000778X
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS