view article
Figure 7
Modelling of the non-isothermal annealing. This figure illustrates the procedure to determine the evolution of the correlation length when the annealing temperature is not constant. To clarify the process, in this example the ramp temperature has a step-like form with time steps of 10 s, as shown in the inset. The heating rate for the model is 90°C min−1 and the initial and final temperatures are 180°C and 215°C, respectively. At each step, the evolution follows that of an isothermal annealing but translated by a certain time (teq) to ensure the continuity of the actual correlation length.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 27| Part 5| September 2020| Pages 1278-1288
https://doi.org/10.1107/S1600577520009820
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS