view article
Figure 11
(a) A schematic of the analyzer holder used to apply a non-linear (1D quadratic) TG (view from the side). The arrows indicate thermal flow. Temperature sensors (T1–T8) were attached onto the side of the analyzer substrate. (b) Photograph of the analyzer holder. (c) Measured 1D quadratic TGs (left) and their long time stability (right) after TG creation.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 28| Part 3| May 2021| Pages 756-768
https://doi.org/10.1107/S160057752100179X
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS