view article
Figure 3
Setup for the application of voltage pulse sequences to FE test devices. The sample is glued on a conducting metal holder that is connected to an oscilloscope for the measurement of the FE switching current. A W needle establishes the electrical contact to a metallic top electrode (see also the inset). In order to change between different top electrodes, the needle can remotely lifted up and the sample moved relatively to the needle with the x, y stages. The plastic needle holder movement is remotely operated and its lowering motion is damped with an induction coil.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 28| Part 3| May 2021| Pages 948-960
https://doi.org/10.1107/S1600577521002484
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS