view article
Figure 5
Dask dashboard task stream charts for two modeling runs using DAMMIF. Each bar in the chart represents a task that is executed by a worker process. The length of the bar is the execution time. In total, 20 work processes are used for each run. Both runs generated 20 bead models in fast mode, based on the data from a lysozyme sample. DAMAVER with the `-a' option is then used to merge these models in (a). In contrast, in (b) the SUPCOMB tasks are distributed to the worker processes and performed in parallel. Note the difference in the time axis. The saving in total run time due to parallelization is obvious. While each DAMMIF model only took ∼15 s to complete, the single-threaded DAMAVER [the longest bar in (a)] lasted ∼7 min.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 28| Part 4| July 2021| Pages 1237-1244
https://doi.org/10.1107/S160057752100521X
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS