The High Energy Density Scientific Instrument at the European XFEL

Zastrau, U.; Appel, K.; Baehtz, C.; Baehr, O.; Batchelor, L.; Berghäuser, A.; Banjafar, M.; Brambrink, E.; Cerantola, V.; Cowan, T.E.; Damker, H.; Dietrich, S.; Di Dio Cafiso, S.; Dreyer, J.; Engel, H.-O.; Feldmann, T.; Findeisen, S.; Foese, M.; Fulla-Marsa, D.; Göde, S.; Hassan, M.; Hauser, J.; Herrmannsdörfer, T.; Höppner, H.; Kaa, J.; Kaever, P.; Knöfel, K.; Konôpková, Z.; Laso García, A.; Liermann, H.-P.; Mainberger, J.; Makita, M.; Martens, E.-C.; McBride, E.E.; Möller, D.; Nakatsutsumi, M.; Pelka, A.; Plueckthun, C.; Prescher, C.; Preston, T.R.; Röper, M.; Schmidt, A.; Seidel, W.; Schwinkendorf, J.-P.; Schoelmerich, M.O.; Schramm, U.; Schropp, A.; Strohm, C.; Sukharnikov, K.; Talkovski, P.; Thorpe, I.; Toncian, M.; Toncian, T.; Wollenweber, L.; Yamamoto, Sh.; Tschentscher, T.

doi:10.1107/S1600577521007335

Journal of Synchrotron Radiation Journal of
Synchrotron Radiation

IUCr IT WDC

home archive editors for authors for readers submit open access

view article

Figure 6
Calculated total external reflectivity of the combined mirrors M1–M3 for both reflecting coatings plotted on a log scale, inset on linear scale. Shown is the minimum energy cut-off using the B₄C coating for all three mirrors and mirrors M1 and M2 at 3.6 mrad suitable to reduce third harmonic content, and the maximum energy cut-off using the Pt coating for all three mirrors and mirrors M1 and M2 at 1.7 mrad. Also shown is the typically used working point at 2 mrad using the B₄C coating. In all cases the mirror M3 is set to its working point of 1.3 mrad.

JOURNAL OF
SYNCHROTRON
RADIATION

ISSN: 1600-5775

Volume 28| Part 5| September 2021| Pages 1393-1416

https://doi.org/10.1107/S1600577521007335

Open

access

Follow J. Synchrotron Rad.

Search IUCr Journals		doi		Advanced search
Author		volume	page