view article
Figure 13
Significance of the use of the correct heat load to predict multilayer thermal deformations. Different heat loads were applied on the basis of load case 3 in d = 30 m from the source: direct heat load without consideration of ML reflectivity (blue), constant heat load p = 1.5 W mm−2 (orange) and the previously presented heat load considering the ML reflectivity (red, cf. Fig. 7[link]). The green line represents the error made if the ML is optimized for the given load case and heat load without consideration of ML reflectivity.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 28| Part 5| September 2021| Pages 1423-1436
https://doi.org/10.1107/S160057752100758X
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS