view article
Figure 1
CRL transfocator at LiX. The lenses are organized into nine lens holders. Each holder (A) can be moved into or out of the beam using a bis­table solenoid (B) and guided by a linear rail (C). In the `in' position, the lenses are pushed by the finger spring (copper-colored) installed in the holder against, and therefore aligned by, a Vee block (D). The transfocator is supported on either end by a stack of x–y stages via kinematic mounts (E). The inset is a photograph of the components in the transfocator.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 29| Part 2| March 2022| Pages 540-548
https://doi.org/10.1107/S1600577521013266
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS