view article
Figure 6
Pressure calibration curves obtained for the various assemblies used in the LVP for (a) the `Kawai' 6–8 compression geometry and for (b) the cubic 6–6 (+third stage) compression geometry. Note, most pressure curves are only valid at room temperature and do not account for the thermal expansion and stress release and flow of the pressure medium at high temperatures. Typically the entire press load range can be used for 6–8, though this is not the case for 6–6 compression due to the reduced anvil support in the cubic geometry. Some of these limits are indicated in (b).

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 29| Part 2| March 2022| Pages 409-423
https://doi.org/10.1107/S1600577522001047
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS