view article

Figure 10
(a) Bitmap employed for the toroidal diamond anvil fabrication. Toroid modification was produced on top of a standard diamond (Almax-diamonds) with the initial culet size of 40/300 µm, bevel angle of 8°. The 1D milling profile is indicated. (b) Photograph made in FIB presenting a view of the milled diamond with a mounting stage inclination of 52°.

Journal logoJOURNAL OF
ISSN: 1600-5775
Follow J. Synchrotron Rad.
Sign up for e-alerts
Follow J. Synchrotron Rad. on Twitter
Follow us on facebook
Sign up for RSS feeds