view article

Figure 5
Calculated photon flux densities at EH3 under various conditions. The black line represents the photon flux density generated by the source. The green and brown lines represent the densities obtained using the 110 keV DMM (M1a–M2a) and 0.3 mm Cu filter, respectively. The blue line represents the density obtained using both the 110 keV DMM and 0.3 mm Cu filter. The inset depicts an enlarged representation of the plot enclosed in the dashed square. The vertical axes of the graphs are drawn in linear (upper) and log (lower) scales.

Journal logoJOURNAL OF
ISSN: 1600-5775
Follow J. Synchrotron Rad.
Sign up for e-alerts
Follow J. Synchrotron Rad. on Twitter
Follow us on facebook
Sign up for RSS feeds