|
Figure 3
Photon flux of BL1N2 using G1, G2 and G3 setups. G2 is used when a high energy resolution over 1000 eV is required. The Mn L-edge (approximately 640 eV) uses G3 and G1 at the boundary line. |
|
Figure 3
Photon flux of BL1N2 using G1, G2 and G3 setups. G2 is used when a high energy resolution over 1000 eV is required. The Mn L-edge (approximately 640 eV) uses G3 and G1 at the boundary line. |