view article
Figure 2
(a) Schematic representation of the 3D printed nozzle assemblies. Screwed version (type O) (top) and glued version (type P) (bottom). (b) Close-ups of the type P nozzle (100 µm inner diameter) prior to gluing and (c) side-by-side picture of both assemblies. The length of the steel tubing is 50 mm.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 30| Part 6| November 2023| Pages 1168-1182
https://doi.org/10.1107/S1600577523008159
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS