view article
Figure 2
(a) Normalized intensity autocorrelation functions for two LiBO2 samples in transmission geometry: a disk, yellow diamonds, and a sample mounted on a UHF1 chip, green circles. Both measurements correspond to q = 17.0 ± 0.9 nm. The geometry used for the measurements on the sample on the chip is shown in the inset. (b) Transmission map (step size of 6 µm) of the LiBO2 sample corresponding to the measurements in (a) on a UFH1 chip. The yellow region corresponds to the active area of the chip, while the red region corresponds to the LiBO2 sample. The black-circled light-green circle shows the position where the measurement reported in (a) has been performed.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 31| Part 3| May 2024| Pages 557-565
https://doi.org/10.1107/S1600577524002510
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS