view article
Figure 1
(a) Schematic of the liquid jet setup installed at the photoemission endstation at the FlexPES beamline. Note that the diagram is not drawn to scale. The nozzle position relative to the skimmer is not accurately represented for better visual clarity. (b) High-magnification image of the experimental arrangement including the 3D-printed nozzle position at a take-off angle near 0°, a skimmer with a 2 mm aperture diameter, and the white beam from the FlexPES beamline used to induce fluorescence of the saturated solution of Fluorescein, in the flat surface sample. (c) Standard nozzle holder and all key components used for mounting the 3D-printed nozzle assembled on the rod.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 31| Part 5| September 2024| Pages 1285-1292
https://doi.org/10.1107/S1600577524006611
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS