view article
Figure 2
(a) 3D rendering of a CAD-model for a micro-sheet accelerated by gas. The 3D design of the nozzle presented at different angles is available in the supporting information. (b) Exit channels of the nozzle were imaged with an environmental scanning electron microscope. (c) 3D-printed nozzle with the two capillaries assembled before adding epoxy glue. The left capillary is used to insert the liquid sample, while the right one is connected to the He gas line. The image was captured with an Olympus SZX16 microscope and UC90 camera.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 31| Part 5| September 2024| Pages 1285-1292
https://doi.org/10.1107/S1600577524006611
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS