view article
Figure 8
An example of how MLgrating could be used to optimize the design of a laminar multilayer grating. The grating was assumed to be made of rhodium, with N = 400 lines mm−1, T = 90°, E = 500 eV, m = −1 and cff = 2.25. m_max was set to 17. The parameters H and Γ were allowed to vary over a large range in panel (a), while the follow-up simulations presented in (b) were performed over a selected narrow range within which the grating efficiency is maximized.

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 31| Part 5| September 2024| Pages 1043-1049
https://doi.org/10.1107/S1600577524006271
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS